Stroke Volume Index (SVi) Calculator

Clinical calculation support · Verify results before clinical use

Calculate indexed stroke volume

Enter stroke volume and body surface area (BSA) to calculate SVi.

SV ÷ BSAFormula
Measured stroke volume per beat.
Unit: mL
Enter the patient's calculated body surface area.
Unit: m²
Reset

Understanding Stroke Volume Index

Stroke volume index (SVi) is stroke volume adjusted for body surface area. Divide stroke volume (SV, in mL) by BSA (in m²) to obtain mL/m².

ParameterValue / formulaReference shown in original tool
Stroke volume (SV)Volume ejected per beat55–100 mL
Stroke volume index (SVi)SV ÷ BSA25–45 mL/m²

These intervals are retained from the original tool for continuity; they should not be treated as universal cutoffs. Reference values vary with measurement technique, population, and clinical context. Confirm the interval used by your echocardiography laboratory.

Clinical context

A low SVi may indicate reduced forward flow, but does not identify its cause. Interpretation should consider measurement quality, heart rate, loading conditions, ventricular function, valvular disease, and the overall hemodynamic state. Normal or elevated values also require clinical context.

Measurement considerations

  • Use a stroke-volume value obtained with a documented method and appropriate quality control.
  • Use SV in mL and BSA in m² so the output unit is mL/m².
  • Do not use SVi alone to diagnose heart failure, shock, or low-flow aortic stenosis.

References

Lang RM, Badano LP, Mor-Avi V, et al.Recommendations for Cardiac Chamber Quantification by Echocardiography in Adults: An Update from ASE and EACVI. J Am Soc Echocardiogr. 2015;28(1):1–39.e14.DOI: 10.1016/j.echo.2014.10.003 · PMID: 25559473
British Society of Echocardiography.Normal reference intervals for cardiac dimensions and function for use in echocardiographic practice: a guideline from the British Society of Echocardiography. Echo Res Pract. 2020.Full text: PubMed Central.

These sources support method-aware echocardiographic measurement and interpretation; they do not establish 25–45 mL/m² as a universal SVi reference interval.

Clinical disclaimer: This calculator performs arithmetic only and is intended for educational and clinical support. Verify input units and source measurements. It does not replace complete clinical assessment, echocardiographic interpretation, or local reference standards.