Pulmonary Vascular Resistance (PVR) Estimate Calculator

Clinical calculation support · Verify results before clinical use

Estimate pulmonary vascular resistance

Enter peak tricuspid regurgitation velocity and RVOT velocity-time integral measured by Doppler echocardiography.

—TRV / VTI

Use the peak TR Doppler velocity with an adequate, well-aligned signal.

Measure the pulsed-wave Doppler VTI in the right ventricular outflow tract.

—Wood units
Estimated pulmonary vascular resistance

Enter measurements to calculate

PVR will be displayed in Wood units (WU).

This Doppler-derived estimate is an adjunct to comprehensive echocardiographic assessment. It does not replace right-heart catheterization when definitive hemodynamic measurement is required.

Method and clinical interpretation

This simplified echocardiographic method estimates pulmonary vascular resistance from the ratio of peak tricuspid regurgitation velocity to the RVOT time-velocity integral.

PVR (WU) = 10 × TRV (m/s) ÷ VTIRVOT (cm)

The calculator implements the simplified equation proposed by Abbas and colleagues. Their regression equation also included an intercept of 0.16 WU; the simplified equation above omits that intercept.

Interpret the ratio cautiously

  • A TRV/VTIRVOT ratio below 0.20 was associated with a low likelihood of PVR above 2 WU in the original study; this is not a stand-alone exclusion test.
  • TRV and VTIRVOT depend on Doppler signal quality and alignment. Recheck acquisition and measurements if the result is unexpected.
  • This estimate has important limitations and should not be treated as interchangeable with invasive PVR from right-heart catheterization.

Important limitations

The original derivation study was small (44 patients). It noted limitations in patients with moderate or severe tricuspid regurgitation, congenital heart disease, shunts, and pulmonary artery dilation; applicability in these settings requires caution.

Measurement checklist

  • Confirm TRV in m/s and RVOT VTI in cm.
  • Ensure appropriate Doppler beam alignment and a reliable TR envelope.
  • Confirm that the RVOT VTI trace is technically adequate.
  • Interpret alongside the clinical context, other echocardiographic findings, and the possibility of altered flow or filling pressures.

Reference

Abbas AE, Fortuin FD, Schiller NB, Appleton CP, Moreno CA, Lester SJ. A simple method for noninvasive estimation of pulmonary vascular resistance. J Am Coll Cardiol. 2003;41(6):1021–1027. PMID: 12651052. DOI: 10.1016/S0735-1097(02)02973-X. PubMed record · DOI
Clinical disclaimer: This calculator provides an approximate, non-invasive estimate for clinical support and education. It must not be used as the sole basis for diagnosis or treatment decisions. When precise PVR measurement is needed, use right-heart catheterization and interpret results in the full hemodynamic context.